Alloy GS-24TV2Alloy GS-24TV 24-port Gigabit Unmanaged Switch

Alloy GS-24TV2 24-Port Gigabit Unmanaged Switch

A straightforward 24-port Gigabit switch for growing wired networks — twenty-four auto-sensing 10/100/1000 Mbps ports in a 1U rackmount chassis, with no configuration to work through. Professionally tested and graded, and backed by a 12-month Reboot IT warranty.

Key Benefits

• 24 Gigabit ports: every port auto-senses 10, 100 or 1000 Mbps, so older and newer equipment share the same switch without manual setup.
• Genuinely plug-and-play: unmanaged by design. There is no web console, no IP address to assign and no firmware to learn — power it on and connect.
• Auto MDI/MDI-X: the switch works out whether a cable is straight-through or crossover on its own, which removes the most common cause of a dead patch lead.
• 1U rackmount chassis: 440 mm wide and 44 mm high, so it fits a standard 19-inch rack or network cabinet without an adapter.
• Standards compliant: IEEE 802.3, 802.3u and 802.3ab support keeps it interoperable with essentially any wired Ethernet device you connect.
• Full and half duplex: broad compatibility with legacy hardware that still has a place on the network.

Performance in Use

An unmanaged Gigabit switch earns its place where you need more ports and nothing else. Dropped into a comms cabinet alongside an existing router or managed core switch, the GS-24TV2 adds twenty-four wired connections that simply work — the sort of expansion an office does when it adds a bank of desks, a meeting room, or a row of workstations that were previously sharing an overloaded eight-port unit.

Because it is unmanaged, there is no VLAN configuration, no spanning-tree tuning and no management interface to secure or patch. That is a genuine advantage at the edge of a network: fewer moving parts, fewer things to misconfigure, and nothing that stops passing traffic because a setting was changed. For a small business, a classroom, a workshop or a home lab, that simplicity is usually the point.

Gigabit throughput on every port matters more than it used to. File transfers to a NAS, workstations pulling from a local server, camera streams and backup jobs all move at wire speed rather than being throttled by a 100 Mbps bottleneck. In a rack, the 1U chassis stacks tidily with patch panels and keeps cabling contained.

Technical Specifications

Is It Right For You?

Condition Grades

Grading covers cosmetic condition only. Every unit is tested to the same functional standard regardless of grade.

Frequently Asked Questions

Does this switch need to be configured before use?

No. It is an unmanaged switch, so there is no setup process. Connect it to power, plug in your network cables and it begins forwarding traffic immediately.

Does it supply PoE to phones or access points?

No. The GS-24TV2 does not provide Power over Ethernet. Devices such as IP phones, cameras and wireless access points will need their own power supply or a separate PoE injector or switch.

Can it be mounted in a standard rack?

Yes. The chassis is 440 mm wide and 44 mm high, which is a standard 1U size for a 19-inch rack or network cabinet.

Will it work alongside my existing router and managed switch?

Yes. It is commonly used as an edge or expansion switch beneath an existing router or managed core switch, adding ports without changing the wider network design.

Do I need special cables?

No. Auto MDI/MDI-X detection means straight-through and crossover cables both work, and the switch sorts out which is which.

What are the shipping costs?

Shipping costs apply based on size and destination — rates are calculated at checkout.

What is included?

The switch and its power lead, together with a tax invoice. Rack ears and patch cables are not included unless stated.

Warranty & Why Reboot IT

This switch is covered by a 12-month Reboot IT warranty. Every unit is tested and graded by our technicians in Melbourne before it is listed, and a tax invoice is supplied with every sale for warranty and business accounting purposes.

Reboot IT has supplied professionally refurbished IT equipment across Australia since 2001, working with businesses, schools, councils and not-for-profits. Our technicians test, grade and support what we sell, and our team is contactable if something is not right.

Reboot IT — reboot-it.com.au — Melbourne, established 2001.