Dell Latitude 7280 — 12.5" FHD replacement LCD panel (M1GMV)
A genuine Dell 12.5" Full HD replacement screen, part number M1GMV, manufactured by AU Optronics (panel B125HAN02.3). Matte anti-glare, non-touch, tested before dispatch and covered by a 12-month Reboot IT warranty with free standard AU shipping.
Key Benefits
-
Genuine Dell part M1GMV: The original factory panel reference (also listed as 0M1GMV), not a generic substitute — so the connector, mounting points and cable routing match the chassis exactly.
-
AU Optronics B125HAN02.3: The manufacturer panel model, letting you confirm an exact match against the screen currently fitted before you order.
-
Full HD 1920 x 1080: Restores the original resolution — no drop to HD, and no change to scaling or display settings after the swap.
-
Matte anti-glare finish: The same non-reflective surface the machine shipped with, which keeps the screen readable under office lighting.
-
Non-touch, eDP: Correct for non-touch Latitude variants. Touch models use a different assembly and this panel will not suit them.
-
Tested before dispatch: Every panel is powered on and checked for dead pixels, backlight faults and cracks before it leaves our Melbourne workshop.
Fitment & Installation
This panel fits the non-touch Dell Latitude 7280, and the closely related 5280 which uses the same 12.5" assembly. Before ordering, confirm the part number on the label behind your existing screen reads M1GMV or 0M1GMV, and that your machine is a non-touch model — touch variants use a bonded digitiser assembly that this panel cannot replace.
Installation is a standard bezel-off screen swap: release the bezel clips, remove the four panel screws, disconnect the eDP cable at the back of the panel, then reverse the process with the new screen. No BIOS change or driver installation is required — Windows detects the panel on the next boot at the original resolution.
A screen replacement is usually the difference between retiring a working machine and getting several more years from it. If the rest of the laptop is sound, replacing a cracked or failing panel is by far the cheapest way to return it to service.
Technical Specifications
| Dell Part Number |
M1GMV / 0M1GMV |
| Panel Manufacturer |
AU Optronics |
| Manufacturer Part |
B125HAN02.3 |
| Screen Size |
12.5 inches |
| Resolution |
Full HD 1920 x 1080 |
| Finish |
Matte anti-glare |
| Touch |
No — non-touch panel |
| Backlight |
LED |
| Interface |
eDP (Embedded DisplayPort) |
| Aspect Ratio |
16:9 |
| Fits |
Dell Latitude 7280 and 5280 (non-touch variants) |
| Shipping |
Free standard AU shipping |
| Warranty |
12-month Reboot IT warranty |
Is It Right For You?
| ✔ Best For |
✘ Not For |
| ✔ Replacing a cracked, dead or failing 7280 / 5280 screen |
✘ Touchscreen Latitude variants — different assembly |
| ✔ IT departments repairing Latitude fleets in house |
✘ Any Latitude generation other than 7280 / 5280 |
| ✔ Refurbishers restoring 12.5" Latitude stock |
✘ Anyone wanting a higher resolution than the original FHD |
| ✔ Anyone confirming part number M1GMV on the existing panel |
|
Condition Grades
| A — Excellent |
Minimal handling marks. Fully tested and verified working before dispatch. |
| B — Good |
Light cosmetic wear from prior service use. Fully tested and verified working before dispatch. |
How We Test It
Each panel is connected to a test rig and powered on before dispatch. We run full white, full black and primary colour fields to expose dead or lit pixels, backlight bleed, clouding and pressure marks, then inspect the surface under angled light for scratches, delamination and edge damage. The connector and mounting ears are checked for bent pins and cracks, and the panel label is photographed so the part number can be confirmed against your order.
Supplied as the bare panel only. Bezel, hinges, cables, camera module and mounting brackets are not included — reuse the parts from your existing screen assembly. Installation is not included and should be carried out by someone comfortable with laptop disassembly.
Frequently Asked Questions
How do I confirm this panel fits my laptop?
Check the label on the back of your current screen. If it reads M1GMV, 0M1GMV or B125HAN02.3, this is a direct match. Your machine must also be a non-touch model.
Will it fit a touchscreen Latitude 7280?
No. Touch variants use a bonded panel-and-digitiser assembly with a different connector. This panel suits non-touch models only.
Does it fit the Latitude 5280 as well?
Yes. The non-touch 5280 uses the same 12.5" Full HD assembly and the same part reference.
Are any drivers or BIOS changes needed?
No. Windows detects the panel automatically on the next boot and runs at the original 1920 x 1080 resolution.
Is it a genuine Dell part?
Yes — genuine Dell part M1GMV, manufactured by AU Optronics, not a generic aftermarket substitute.
How is it tested?
Each panel is powered on and checked for dead or lit pixels, backlight uniformity, and physical damage before dispatch.
What warranty and shipping apply?
A 12-month Reboot IT warranty applies, with free standard AU shipping from our Melbourne workshop.
Reboot IT Warranty & Trust
Backed by a full 12-month Reboot IT warranty. Reboot IT has been an Australian refurbished-technology specialist since 2001, based in Melbourne, where every item is professionally tested, graded and quality-checked in house before dispatch. Ships with free standard AU shipping. If anything is not right, our Melbourne-based support team is here to help. reboot-it.com.au