Cisco Meraki MR62 Outdoor 802.11n Cloud?Managed Access Point | Wty

The Cisco Meraki MR62 is an enterprise‑class, cloud‑managed outdoor access point designed for courtyards, campuses, warehouses and industrial spaces that need reliable 2.4 GHz Wi‑Fi. Its IP67 enclosure, salt‑spray and vibration testing, and operating range from about ‑20°C to 50°C make it suitable for demanding Australian outdoor conditions.

Key use cases

• Extending Wi‑Fi to outdoor areas such as school grounds, hospitality venues and building forecourts.
• Point‑to‑point or point‑to‑multipoint links over longer distances when paired with suitable external antennas.
• Providing guest and staff wireless with VLAN separation, firewall policies and traffic shaping in small to mid‑sized sites.

Top features and benefits

• Rugged design: IP67 rating with sealed housing, tested for dust, water, shock, vibration and extreme temperature for reliable outdoor operation.
• High‑performance radio: Single 2.4 GHz 2x2 MIMO 802.11n radio with up to 300 Mbps data rate, beamforming, MRC and packet aggregation for stronger coverage and throughput.
• Flexible mounting: Includes hardware to mount on walls or vertical and horizontal poles for easy deployment on most structures.
• Secure networking: Supports WPA/WPA2‑PSK, WPA2‑Enterprise with 802.1X, guest isolation, VLAN tagging, policy firewall and Air Marshal WIPS for robust security.
• Cloud‑managed intelligence: Self‑configuring plug‑and‑play setup, automatic RF optimisation and self‑healing mesh capabilities reduce onsite management overheads.

Operating system pros and cons

• Pros: Cloud‑managed firmware and feature set provide centralised configuration, monitoring, RF optimisation, Layer 7 traffic shaping and reporting from an intuitive dashboard.
• Cons: Requires an active Meraki cloud licence to operate, and is based on older 802.11n technology limited to 2.4 GHz, so it does not offer newer Wi‑Fi 5/6 performance levels.

Specifications (top 10)

• CPU & chipset: Atheros AR7242 400 MHz CPU with Atheros AR9283 wireless chipset and AR8021 Ethernet controller.
• Memory & storage: 16 MB Macronix flash; designed as a dedicated access point rather than a general compute platform.
• Wireless: Single 2.4 GHz 802.11b/g/n radio, 2x2 MIMO with two spatial streams, up to 300 Mbps data rate, beamforming and MRC.
• Transmit power: Up to 26 dBm at 2.4 GHz, automatically limited to comply with local regulatory requirements.
• Antenna connectors: Two external N‑type connectors; compatible with Cisco Meraki omni and sector antennas for flexible coverage shaping.
• Ethernet interface: 1 x 10/100/1000Base‑T RJ45 port with 802.3af PoE support for combined data and power.
• Power: Powered via 802.3af PoE (24–57 V DC); maximum power consumption around 6.5 W (PoE injector or PoE switch required, sold separately).
• Dimensions: Approx. 267 mm (L) x 192 mm (W) x 57 mm (H).
• Weight: Approx. 680 g for easy pole or wall mounting without heavy structural requirements.
• Environmental ratings: Operating temperature from about ‑20°C to 50°C, IP67 dust and water resistance, tested for salt spray and vibration.

Quality assurance and warranty

• All units are certified refurbished by Reboot IT and pass a thorough, multi‑stage testing and inspection process using cutting‑edge diagnostic software to verify every feature and function.
• Reboot IT has been an expert refurbisher since 2001, with a documented process that includes secure data wiping (where applicable), comprehensive hardware testing, professional cleaning and clear grading.
• Each device is verified refurb through Reboot IT’s thorough testing process, ensuring reliable, like‑new performance at a fraction of the cost of new equipment.
• This Cisco Meraki MR62 is supplied with a 1‑year hardware warranty from Reboot IT, covering defects in materials and workmanship for your peace of mind.

Cosmetic grades (Excellent vs Good)

• Excellent Grade: Minor signs of previous use only, such as light surface marks; overall very clean appearance while remaining fully functional and thoroughly tested.
• Good Grade: Noticeable but purely cosmetic wear such as heavier scuffs or scratches, while all features and functions are fully working and tested to the same standards.

Why buy refurbished from Reboot IT?

• Over two decades’ experience and more than 100,000 customers across Australia, specialising in professionally tested, certified refurbished IT hardware.
• Every unit’s features and functions are tested, any faulty parts are replaced with quality components, and devices are cleaned and prepared for reliable deployment.
• Buying refurbished reduces e‑waste and delivers excellent value without compromising on performance, backed by Reboot IT’s warranty and local support.

Equip your site with a rugged, cloud‑managed Cisco Meraki MR62 from Reboot IT today and extend secure Wi‑Fi to your outdoor and industrial spaces with confidence.