Telstra VR1600vTP-Link Archer VR1600v AC1600 VDSL ADSL Dual Band Modem Router NBN VoIP

Key Benefits

• AC1600 dual-band Wi-Fi: 300Mbps on 2.4GHz for longer range and 1300Mbps on 5GHz for high-bandwidth devices — run both bands simultaneously for optimal network performance.
• Built-in VDSL2/ADSL2+ modem: Connects directly to an NBN FTTN or FTTB wall socket (phone line) — no separate modem required. Also supports standalone ADSL2+ connections.
• 2 x FXS VoIP ports: Connect up to 2 analog phones or fax machines directly to the router for VoIP calling — keeping existing handsets in service on an NBN Voice service.
• 4 x Gigabit LAN ports: Wire up desktop computers, smart TVs, games consoles, and NAS devices at Gigabit speeds for maximum wired throughput.
• NBN FTTN/FTTB compatible: Meets the requirements for FTTN and FTTB NBN connection types, making it a direct replacement for ISP-supplied gateway hardware.
• Certified refurbished with 12-month warranty: Professionally tested and graded by Reboot IT — Melbourne's IT specialists since 2001.

Performance in Use

The TP-Link Archer VR1600v is designed as an all-in-one gateway for NBN FTTN and FTTB connections — the connection types that use the existing copper phone line for the last segment to the premises. Its built-in VDSL2 modem supports the FTTN/FTTB link profile, eliminating the need for a separate modem and simplifying the home network to a single device. Connection to the NBN wall socket replaces whatever ISP-supplied hardware was previously installed.

The dual-band 802.11ac radio delivers AC1600 aggregate throughput: the 2.4GHz band reaches further and penetrates walls better, making it suitable for smart home devices and IoT sensors, while the 5GHz band provides the speeds required for 4K streaming, video conferencing, and online gaming. The four Gigabit LAN ports handle wired devices with full NBN-tier bandwidth — important for NAS devices and desktop workstations where Wi-Fi latency is undesirable.

The two FXS VoIP ports are a key differentiator for households and small businesses that still rely on a landline number. They connect standard analog handsets directly to the router and operate via the ISP's VoIP service — preserving the existing phone number on NBN Voice without purchasing an additional VoIP adapter. This makes the VR1600v a genuine like-for-like replacement for Telstra-supplied NBN gateway hardware.

Tech Specs

Is It Right for You?

Condition Grades

Frequently Asked Questions

Is this compatible with NBN FTTN and FTTB?

Yes — the VR1600v has a built-in VDSL2 modem that connects directly to the DSL wall socket for FTTN and FTTB NBN connections. No separate modem is required. For FTTC or HFC NBN connections, the WAN Ethernet port is used instead.

Can I keep my existing analog phone number?

The two FXS VoIP ports allow analog handsets to connect directly to the router and use an NBN Voice VoIP service. Whether your phone number can be ported depends on your NBN provider's VoIP service — check with your ISP before switching.

Is this the Telstra-supplied version?

Yes — the VR1600v was supplied by Telstra as their NBN gateway modem. It is functionally identical to the retail TP-Link version and is compatible with other NBN providers supporting VDSL2 connections, though ISP-specific VoIP configuration may vary.

Does it support the 5GHz Wi-Fi band?

Yes — the VR1600v is dual-band 802.11ac (Wi-Fi 5) supporting both 2.4GHz (300Mbps) and 5GHz (1300Mbps) simultaneously. The 5GHz band is ideal for streaming and gaming; 2.4GHz provides better range for smart home devices.

What shipping costs apply?

Shipping costs apply based on size and destination — rates are calculated at checkout.