Cisco AIR-LAP1042N-N-K9802.11n Wireless Access Point · 3mth Wty

Cisco Aironet 1042N Wireless Access Point (AIR-LAP1042N-N-K9)

An enterprise 802.11a/g/n dual-radio access point with internal antennas and 802.3af PoE. This is a controller-based (lightweight) unit — it requires a Cisco wireless LAN controller and will not operate standalone.

Key Benefits

• Dual-radio 802.11n: serves 2.4 GHz and 5 GHz simultaneously, so older and newer client devices are handled at the same time.
• 2x2 MIMO: multiple-input multiple-output with a rated link speed of up to 300 Mbps, a substantial step up from 802.11a/g.
• Standard 802.3af PoE: draws roughly 12.95W, so it runs from an ordinary PoE switch port without needing enhanced PoE.
• Internal antennas: a clean enclosure with no external aerials to align or damage, suited to ceiling and office mounting.
• Enterprise controller model: centrally managed alongside the rest of the estate rather than configured device by device.
• Low-cost fleet expansion: a practical way to add or replace coverage on an existing Cisco controller deployment.

Performance in Use

The Aironet 1040 series was Cisco's entry-level enterprise 802.11n access point, aimed at small and medium sites that wanted controller-managed wireless without the cost of the higher tiers. Dual radios covering 2.4 GHz and 5 GHz with 2x2 MIMO put it well ahead of the 802.11a/g equipment it replaced.

Its practical role today is fleet maintenance. If you already run a Cisco wireless LAN controller with 1040-series units in place, these are inexpensive spares and expansion points that need no new configuration model. Power comes from any standard 802.3af switch port, so no special injectors are required.

The single most important thing to understand before buying: this is a lightweight, controller-based access point. It registers to a Cisco WLC and cannot be used as a standalone or home access point. Plugged into an ordinary router it will not serve wireless. If you do not already run a compatible controller, this is not the right unit.

Technical Specifications

Is It Right For You?

Condition Grades

Grading covers cosmetic condition only. Every unit is tested to the same functional standard regardless of grade.

Frequently Asked Questions

Can I use this without a Cisco controller?

No. This is a lightweight controller-based access point. It requires a Cisco wireless LAN controller and will not work standalone or plugged into a home router.

Does it support 802.11ac or Wi-Fi 6?

No. It is an 802.11a/g/n dual-radio access point with a rated link speed of up to 300 Mbps.

What power does it need?

Standard IEEE 802.3af PoE, roughly 12.95W. Any ordinary PoE switch port will run it.

Are the antennas external?

No, the antennas are internal to the unit.

Is a mounting bracket included?

Brackets and mounting hardware are not included unless stated.

Is a power injector included?

No. The unit is designed to run from a PoE switch port; injectors are not supplied.

What are the shipping costs?

Shipping costs apply based on size and destination — rates are calculated at checkout.

Warranty & Why Reboot IT

This item is covered by a 3-month Reboot IT warranty. Every unit is tested and graded by our technicians in Melbourne before it is listed, and a tax invoice is supplied with every sale for warranty and business accounting purposes.

Reboot IT has supplied professionally refurbished IT equipment across Australia since 2001, working with businesses, schools, councils and not-for-profits. Our technicians test, grade and support what we sell, and our team is contactable if something is not right.

Reboot IT — reboot-it.com.au — Melbourne, established 2001.