Mitel MiVoice 5330e IP Phone — Backlit Display Business Handset
A mid-to-upper tier business VoIP desk phone (part 50006476) with a backlit display and Power over Ethernet, built for Mitel MiVoice Business and MiVoice Office platforms. Professionally tested and graded by Reboot IT, with a 12-month warranty included.
Key Benefits
-
More programmable keys than the 5320 — The 5330e sits a tier above the 5320 in Mitel's range, with a larger complement of self-labelling feature keys. That matters for anyone monitoring several lines or needing a long list of speed dials at hand.
-
Backlit display — Clearly readable in dim reception areas and open-plan offices where overhead lighting is uneven or shadowed by monitors.
-
Self-labelling keys — Speed dials and line appearances label themselves on screen, so there are no paper inserts to reprint when staff or extensions change.
-
Power over Ethernet — Draws power from the network switch over the same cable that carries the call. No power adapter at the desk and no second outlet needed.
-
Full-duplex speakerphone — Both parties can talk at once without clipping, which makes desk-side conference calls genuinely usable.
-
Integrated Ethernet switch — A second port lets a PC share the same wall socket, so each desk needs only one cable run.
Performance in Use
The MiVoice 5330e is the handset you put on the desks that handle more call traffic: team leaders, sales desks, anyone covering several lines or needing a broad set of speed dials within reach. It carries more programmable keys than the entry 5320, without moving up to the size and cost of a reception console.
Its practical appeal is fleet consistency. On an existing Mitel MiVoice Business or MiVoice Office platform, this handset registers alongside your current phones and behaves exactly as staff already expect — no retraining, no configuration divergence. For adding desks or replacing a failed unit, refurbished hardware does that job at a fraction of new cost while keeping the estate uniform, and keeps serviceable equipment out of the waste stream.
One point to settle before ordering: this is a platform-specific handset, not a generic SIP phone. It is designed to register to Mitel call control. On a Mitel system it will slot straight in. On a third-party or open-source SIP platform, verify compatibility for your particular setup first — behaviour outside the Mitel environment varies and should not be assumed.
Tech Specs
| Model |
Mitel MiVoice 5330e IP Phone |
| Part Number |
50006476 |
| Display |
Backlit LCD |
| Keys |
Programmable self-labelling feature keys |
| Power |
Power over Ethernet (PoE) |
| Speakerphone |
Full-duplex handsfree |
| Network |
Dual Ethernet ports (integrated switch for PC pass-through) |
| Platform |
Mitel MiVoice Business / MiVoice Office |
| Supplied With |
Handset, curly cord and stand |
| Warranty |
12 months — Reboot IT |
Is It Right for You?
| Best For ✓ |
Not For ✗ |
| Sites already running a Mitel MiVoice platform |
Generic third-party SIP systems (verify first) |
| Desks monitoring multiple lines |
Home users without a PBX |
| Users needing many speed dials to hand |
Full reception consoles with large displays |
| PoE network installs with one cable per desk |
Cordless or DECT requirements |
| Expanding a fleet at lower cost |
Video calling |
Condition Grades
| Grade |
Description |
| A — Excellent |
Minimal cosmetic marks. Fully tested and functional. |
| B — Good |
Light wear consistent with normal office use. Fully tested and functional. |
FAQ
Will this work with my phone system?
It is designed for Mitel MiVoice Business and MiVoice Office platforms and registers to those systems directly. It is not a generic SIP handset — if you run a third-party or open-source platform, confirm compatibility for your specific configuration before ordering.
How does the 5330e differ from the 5320e?
The 5330e sits a tier higher in the range, with a larger set of programmable self-labelling keys. Both offer a backlit display and full-duplex speakerphone. Choose the 5330e where a user needs more line appearances or speed dials directly on the handset.
Does it need a power adapter?
Normally no. The phone supports Power over Ethernet and draws power from the network switch over the same cable that carries the call. If your switch does not provide PoE, an injector or power adapter is needed and can be sourced separately.
Can I plug my PC into the phone?
Yes. An integrated two-port switch lets a computer connect through the handset and share the same wall socket — useful where a desk has only one network outlet.
What is supplied in the box?
The handset, curly cord and stand. As these are normally PoE powered, no adapter is included.
What shipping options are available?
Shipping costs apply based on size and destination — rates are calculated at checkout.
Who is Reboot IT?
We are a Melbourne-based refurbisher operating since 2001. Every unit is professionally tested, cleaned and graded before dispatch, and backed by our own warranty rather than a third party's.
12-Month Warranty — Reboot IT
Every unit sold by Reboot IT is professionally tested and graded before dispatch. We have been refurbishing IT equipment in Melbourne since 2001, and this handset carries our standard 12-month hardware warranty. If something is not right, contact us directly — you deal with the people who tested the equipment.