Cisco C2960Cisco Catalyst 3560 WS-C2960+24PC-L V01 Network Switch · 3mth Wty

Cisco Catalyst WS-C2960+24PC-L — 24-Port Fast Ethernet PoE Access Switch

The Cisco Catalyst WS-C2960+24PC-L is a 1U managed access switch featuring 24 × 10/100 PoE ports (802.3af, 370 W total PoE budget), 2 × Gigabit Ethernet SFP uplinks, and Cisco IOS LAN Base software. Ideal for small-to-medium enterprise wiring closets deploying IP phones, wireless access points, and IP cameras. Backed by a full 12-month Reboot IT warranty.

Key Benefits

• 24 PoE access ports: Powers IP phones, wireless access points, IP cameras, and building automation devices — eliminating separate power injectors across the wiring closet
• 370 W total PoE budget: Ample power for fully loaded deployments of IP phones and low-power APs across all 24 ports simultaneously without oversubscription
• 2 GbE SFP uplinks: Dual Gigabit fibre or copper uplinks provide high-bandwidth connections to the distribution layer and optional uplink redundancy via LAG
• Cisco IOS LAN Base: Full Layer 2 feature set including 802.1Q VLANs, RSTP/MSTP Spanning Tree, port security, ACLs, and QoS for VoIP traffic prioritisation
• 802.1X port authentication: Enforces identity-based network access control at every port — integrates with Cisco ISE or any RADIUS server for enterprise NAC
• Compact 1U form factor: Standard rack-mount design fits any 19-inch rack or wall-mount bracket — suitable for branch IDF/MDF cabinets and small wiring closets

Performance in Use

In a small office or branch wiring closet, the WS-C2960+24PC-L connects IP phones, wireless access points, and workstations on a single managed PoE switch. IOS QoS features prioritise VoIP traffic using DSCP markings and queuing policies, ensuring clear voice quality even when the network is under load. The 802.3af PoE implementation powers standard IP phones and 802.11n/ac APs without external injectors.

Network engineers can segment traffic using 802.1Q VLANs — separating voice, data, and management planes on the same physical switch. RSTP provides fast convergence and loop protection, while IGMP snooping prevents multicast floods from overloading PoE-powered endpoints.

For Cisco certification study (CCNA, CCNP), the 2960+ is a widely used managed access switch platform. The LAN Base IOS supports the full range of Layer 2 switching, VLAN, STP, and security scenarios covered in both the CCNA Enterprise and CCNP switching curricula.

Technical Specifications

Is It Right for You?

Condition Grades

Frequently Asked Questions

Is this a Catalyst 3560 or a 2960+ switch?

The part number WS-C2960+24PC-L identifies this as a Cisco Catalyst 2960+ series switch. The 2960+ is a Layer 2 LAN Base access switch; the 3560 is a separate product line with Layer 3 IP Base capability. Verify the model number on the unit chassis before deployment.

Does it support Gigabit access ports?

No — the 24 access ports run at 10/100 Mbps (Fast Ethernet). The two uplink ports are Gigabit SFP. If Gigabit access ports are required, consider the WS-C2960X series or Catalyst 3xxx range.

What SFP modules are compatible with the uplink ports?

The two SFP uplink ports accept standard Cisco 1000BASE-SX, 1000BASE-LX, or 1000BASE-T SFP transceivers. Third-party SFPs may work but can generate compatibility warnings in IOS — use Cisco-branded modules for full support.

Can it power both IP phones and wireless APs simultaneously?

Yes — the 370 W PoE budget supports a mix of 802.3af devices. Standard IP phones draw approximately 6 W and 802.11n APs draw approximately 12 W, so a mixed deployment of 24 devices comfortably fits within the power budget.

What warranty is included?

A 12-month Reboot IT warranty covers all hardware components from the date of purchase.

How does shipping work?

Shipping costs apply based on size and destination — rates are calculated at checkout.